To order

Mizrak MZK 3800 SPECIAL Sliding Table Panel Saw

Sliding Table Panel Saws

Table Size: 550 x 910 mm
Weight: 808 kg

To order

Mizrak MZK 2800 PRESTIJ Sliding Table Panel Saw

Sliding Table Panel Saws

Weight: 646 kg

Sitting between the 3200 mm and 2200 mm models, the MZK 2800 PRESTIJ offers 2800 mm of sliding table travel on the lightest mid-size frame in the line at 646 kg. The cutting head is unchanged from the longer PRESTIJ saws: 4 kW saw motor, 0.75 kW scorer, 80 mm depth at 90 degrees.

To order

Mizrak MZK 2200 PRESTIJ Sliding Table Panel Saw

Sliding Table Panel Saws

Weight: 625 kg

At 625 kg the MZK 2200 PRESTIJ is the lightest saw in the PRESTIJ line, built on a 2200 mm sliding table for shops working mainly from half sheets and pre-cut board. Cutting capacity is not reduced: 4 kW saw motor, 0.75 kW scoring motor, 80 mm depth at 90 degrees and 65 mm at 45 degrees.

To order

Mizrak MZK 3200 PRESTIJ Sliding Table Panel Saw

Sliding Table Panel Saws

Weight: 700 - 780 - 790 kg

A 3200 mm stroke takes a standard sheet lengthwise in one pass, and that is what separates the MZK 3200 PRESTIJ from the 2800 mm MZK 2800 PRESTIJ below it and the 3800 mm model above. Manual tilt and height, 380 mm aluminium carriage, 4 kW saw motor, 0.75 kW scorer, 700-780-790 kg by build.

To order

Mizrak MZK 3800 PRESTIJ Sliding Table Panel Saw

Sliding Table Panel Saws

Table Size: 550 x 910 mm
Weight: 740 kg

To order

Mizrak MZK 3200 SPECIAL Sliding Table Panel Saw

Sliding Table Panel Saws

Weight: 760 kg

Where floor length is tight, the MZK 3200 SPECIAL puts the full SPECIAL specification on a 3200 mm sliding table rather than the 3800 mm stroke of the MZK 3800 SPECIAL: 420 mm aluminium carriage on linear guides, 4 kW saw motor, 0.75 kW scoring unit, actuator-driven 45-90 degree tilt, 760 kg net.

To order

Mizrak MZK NC RIPPER Door Sizing Machine

Door Panel Sizing Machines

Air pressure: 6 - 8 Bar
Weight: 1580 kg

To order

Mizrak MZK 1500 PRESTIJ Sliding Table Panel Saw

Sliding Table Panel Saws

Weight: 685 kg

Shortest carriage run in the range at 1500 mm, the MZK 1500 PRESTIJ is also the one PRESTIJ saw whose technical table lists a 365 mm aluminium carriage instead of 380 mm. The full cutting head is retained: 4 kW saw motor, 0.75 kW scorer, 80 mm at 90 degrees, 65 mm at 45 degrees, 685 kg net.

To order

Ripper CNC KKM Door Machining Centre

Door Panel Sizing Machines

Spindle: 1.5 kW and 2.2 kW

The Ripper CNC KKM is the PC-controlled member of the RIPPER range: machining positions run from a program instead of mechanical stops, on 750 W X, Y and Z servo motors, 1.5 kW and 2.2 kW spindle motors and a 2000 mm blade machining capacity. A remote connection for diagnostics is included.

To order

MZK Kapi Kilit Door Lock Machine

Door Lock and Hinge Mortising Machines

Lock seats only: the MZK Kapi Kilit is the base door lock machine in Mizrak's door range, clamping a finished leaf and guiding the cutter mechanically instead of by hand. Mizrak publishes no technical table for the MZK Kapi Kilit, so capacities, motor rating and dimensions are confirmed by the supplier at quotation.

To order

MZK NC Ripper Double PLC Control Door Sizing Machine

Door Panel Sizing Machines

Air pressure: 6 - 8 Bar
Cutting length: Ø25 x 150 Teeth
Weight: 2450 kg

To order

Mizrak MZK NC RIPPER KK Door Sizing and Lock Slotting Machine

Door Panel Sizing Machines

Air pressure: 6 - 8 Bar
Weight: 2050 kg

To order

MZK CNC Ripper Double Door Sizing and CNC Machining Line

Door Panel Sizing Machines

Cutting Width: 1000 mm
Cutting Height: 60 mm
Spindle: 5.5 kW

To order

Mizrak Kapi Kilit ve Mentese Door Lock and Hinge Machine

Door Lock and Hinge Mortising Machines

The Mizrak Kapi Kilit ve Mentese is catalogued as a combined lock and hinge machine, taking both hardware cuts at one clamping, but carries no published technical table. Capacities, motor ratings and the lock-to-handle distance for the Kapi Kilit ve Mentese are confirmed by the supplier at quotation.

To order

MZK Kapi Kilit Plus Door Lock and Hinge Machine

Door Lock and Hinge Mortising Machines

Air pressure: 6–8 atm
Weight: 900 kg

To order

Mizrak MZK RIPPER KKM Door Panel Sizing Machine

Door Panel Sizing Machines

MZK RIPPER KKM is the door panel sizing model in Mizrak Makine's Kapi Uretim Makineleri range, listed by the manufacturer with no technical data sheet behind it. No capacity, motor rating or blade specification is published for the MZK RIPPER KKM; figures are confirmed by the supplier at quotation.

To order

Mizrak Kalinlik Makinasi (Thicknesser)

Thicknessers (Thickness Planers)

The Mizrak Kalinlik Makinasi is a thicknesser: timber with one flat reference face passes through and leaves with the opposite face machined parallel at a set thickness. Unlike the numbered KA-series thicknessers, the Mizrak Kalinlik Makinasi carries no published width, motor or feed figure, so capacity is confirmed at quotation.