Door Panel Sizing Machines
8 machines
Sort Recommended
Machines found
-
To orderMizrak MZK NC RIPPER Door Sizing Machine
Door Panel Sizing Machines- Air pressure
- 6 - 8 Bar
- Weight
- 1580 kg
-
To orderMizrak MZK NC RIPPER KK Door Sizing and Lock Slotting Machine
Door Panel Sizing Machines- Air pressure
- 6 - 8 Bar
- Weight
- 2050 kg
-
To orderMizrak MZK RIPPER KKM Door Panel Sizing Machine
Door Panel Sizing MachinesMZK RIPPER KKM is the door panel sizing model in Mizrak Makine's Kapi Uretim Makineleri range, listed by the manufacturer with no technical data sheet behind it. No capacity, motor rating or blade specification is published for the MZK RIPPER KKM; figures are confirmed by the supplier at quotation.
-
To orderMZK CNC Ripper Double Door Sizing and CNC Machining Line
Door Panel Sizing Machines- Cutting Width
- 1000 mm
- Cutting Height
- 60 mm
- Spindle
- 5.5 kW
-
To orderMZK Manuel Kapi Ebatlama Manual Door Sizing Machine
Door Panel Sizing Machines- Cutting Width
- 265 mm
- Cutting length
- 250 mm
-
To orderMZK NC Ripper Double PLC Control Door Sizing Machine
Door Panel Sizing Machines- Air pressure
- 6 - 8 Bar
- Cutting length
- Ø25 x 150 Teeth
- Weight
- 2450 kg
-
To orderMZK NC Ripper KS Door Sizing Machine
Door Panel Sizing Machines- Air pressure
- 6 – 8 Bar
- Weight
- 1450 kg
-
To orderRipper CNC KKM Door Machining Centre
Door Panel Sizing Machines- Spindle
- 1.5 kW and 2.2 kW
The Ripper CNC KKM is the PC-controlled member of the RIPPER range: machining positions run from a program instead of mechanical stops, on 750 W X, Y and Z servo motors, 1.5 kW and 2.2 kW spindle motors and a 2000 mm blade machining capacity. A remote connection for diagnostics is included.
Door Panel Sizing Machines — in brief
Door panel sizing machines bring a door leaf or a door component to its final length, width and edge profile, and on the larger models cut the lock, handle and lighting recesses in the same cycle. This page lists eight MIZRAK machines: the hand-set MZK Manuel Kapi Ebatlama, the NC RIPPER and NC Ripper KS for sizing and edge work, the NC RIPPER KK and NC Ripper Double PLC Control which add lock and handle machining, the three-axis MZK CNC Ripper Double, the PC-controlled Ripper CNC KKM machining unit, and the MZK RIPPER KKM. All are supplied by quotation.
How to choose a door panel sizing machine
Choose by the operations you want finished on one machine. The eight MIZRAK machines here split three ways: sizing and edge milling, sizing plus lock and handle machining, and CNC hardware routing.
Sizing and edge milling only
Sizing-only machines suit shops that prepare hardware elsewhere. The MZK Manuel Kapi Ebatlama sizes by hand with a 45 to 90 degree tilting head, linear guideways and a digital display, cutting the lamp groove at once. The MZK NC RIPPER adds numerical control and the widest single-leaf envelope here, 1250 mm wide by 2700 mm long and 30 to 60 mm thick, and cuts rebated doors. The MZK NC Ripper KS works narrow components, 10 to 270 mm wide and 2500 mm long, on nine blades with a sanding unit and 5 mm architrave recessing.
Sizing plus lock and handle machining
Combining sizing and lock work removes the handling step where dimensional drift appears. The MZK NC RIPPER KK adds lock, handle and lighting-recess machining on a single bridge, sizing to 2200 x 1000 mm at 29.66 kW. The MZK NC Ripper Double PLC Control splits the work over two bridges and completes a full door plus the lock handle pocket in 1 minute 15 seconds at 30.41 kW.
CNC hardware routing
CNC earns its place where the hardware layout changes between door types. The MZK CNC Ripper Double adds three-axis servo routing of hinge, lock handle and faceplate seats after cutting leaves to 2200 x 1000 x 60 mm, at 38 kW. The Ripper CNC KKM is the machining unit without a sizing group: programmed X, Y and Z positions on 750 W servos, 1.5 kW and 2.2 kW spindles, 2000 mm blade machining capacity.
Power supply and installed load
Door sizing machines are three-phase installations. Published total power runs 25.75 kW on the KS, 29.66 kW on the KK, 30.41 kW on the NC RIPPER and NC Ripper Double PLC Control, and 38 kW at 80 A on the CNC Ripper Double, all at 380-400 V AC 50-60 Hz with air at 6 to 8 bar. Have an electrician confirm the board and cable run first.
Floor space and extraction
Every machine here claims a permanent bay. Bodies measure 3600 mm on the NC RIPPER, 4000 mm on the KS, 4500 mm on the KK, 5200 mm on the NC Ripper Double PLC Control and 5700 mm on the CNC Ripper Double, at 1450 to 2450 kg, with clear length at both ends for loading leaves. Extraction must be ducted before commissioning: the CNC Ripper Double takes two connections, 150 mm for the CNC group and 200 mm for the sizing group.
Tooling and what is quoted separately
Blade and cutter sets belong in the specification. The NC Ripper Double PLC Control uses fixed tooling sizes: 300 x 30 x 3.2 mm and 250 x 30 x 3.2 mm blades, a 125 x 20 x 3.2 mm milling cutter and dedicated lock, faceplate and handle cutters. Budget replacement tooling, extraction, a compressor if needed, and operator training.
Entry machines against the top of the range
The gap is automation and control, not cutting quality. The MZK Manuel Kapi Ebatlama is hand-set and simple to service, and Mizrak publishes no motor or footprint data for it; the MZK RIPPER KKM is likewise listed without a data sheet, so both are confirmed in writing. PLC machines hold a repeatable dimension through encoder-controlled axes; CNC models replace stops with programmed positions and cut non-standard hardware openings, but need a programmer rather than a setter.
How to choose
-
Leaves wider than 1000 mm
The MZK NC RIPPER is the model that takes 1250 mm width and 2700 mm length; the twin-bridge and KK machines size to 2200 x 1000 mm.
-
Lock and handle pockets cut in-house
Specify the MZK NC RIPPER KK, the MZK NC Ripper Double PLC Control or the MZK CNC Ripper Double. The base NC RIPPER, the KS and the manual saw leave hardware work to a separate lock machine.
-
Frames, jambs and architraves rather than leaves
The MZK NC Ripper KS is the narrow-component machine, at 10 to 270 mm processing width and 2500 mm length, with a sanding unit and 5 mm architrave recess.
-
Hardware layout changes between door types
Choose a CNC machine. The MZK CNC Ripper Double routs hinge, lock handle and faceplate seats from programmed positions; the Ripper CNC KKM does the same as a machining unit for a shop that already sizes doors.
-
Cycle time matters more than flexibility
The MZK NC Ripper Double PLC Control sizes a leaf and opens the lock handle pocket in 1 minute 15 seconds on two bridges, under PLC control rather than CNC.
-
Installed electrical load available
Match the machine to the board: 25.75 kW on the KS, 29.66 kW on the KK, 30.41 kW on the NC RIPPER and NC Ripper Double PLC, 38 kW at 80 A on the CNC Ripper Double.
-
Floor length available in the bay
Allow 3600 mm for the NC RIPPER, 4000 mm for the KS, 4500 mm for the KK, 5200 mm for the NC Ripper Double PLC and 5700 mm for the CNC Ripper Double, plus loading space at each end.
-
Low volume or occasional door work
The MZK Manuel Kapi Ebatlama is the entry point, with a 45-90 degree tilting head, digital display and lamp groove cutting, and no PLC or lock group to programme.

































