Dust Collectors and Chip Extraction Units
17 machines
Sort Name
Machines found
-
To orderHOLZMANN ABS1080 Mobile Dust and Chip Collector, 1080 m3/h
Dust Collectors and Chip Extraction Units- Weight
- 23 kg
Where the ABS1500FF trades bag size for airflow, the ABS1080 does the opposite: a 100 litre chip bag of 375 x 1060 mm fed by 1080 m3/h at 1020 Pa. A 1000 W S6 / 750 W S1 motor at 2950 min-1 drives a 230 mm fan wheel, the inlet is a single 100 mm port, and the whole unit is 23 kg on four swivel casters.
-
To orderHOLZMANN ABS1500FF Dust Collector – 1500 m³/h
Dust Collectors and Chip Extraction Units- Overall dimensions
- 720 x 380 x 1400 mm
- Weight
- 32 kg
-
To orderHOLZMANN ABS2200FLEX Low-Profile Dust Collector (2200 m³/h)
Dust Collectors and Chip Extraction Units- Overall dimensions
- 1540 x 550 x 750 mm
- Weight
- 46.5 kg
-
To orderHOLZMANN ABS2480 Dust Collector with Insert — 2480 m³/h, 270 l Chip Bag
Dust Collectors and Chip Extraction Units- Weight
- 36 kg
The HOLZMANN ABS2480 is a mobile dust collector with insert that delivers 2480 m³/h of suction performance at 1800 Pa through two 100 mm ports and collects into a single 270 l chip bag. Built around a 300 mm fan wheel at 2950 min-1, the ABS2480 is offered as a 230 V or a 400 V variant.
-
To orderHOLZMANN ABS3000SE Dust Collector – 3000 m³/h, Three Machine Outputs
Dust Collectors and Chip Extraction Units- Overall dimensions
- 985 x 560 x 2200 mm
- Weight
- 45 kg
-
To orderHOLZMANN ABS3880 Dust Collector with Insert — 3880 m³/h, Three 100 mm Ports
Dust Collectors and Chip Extraction Units- Weight
- 52 kg
The HOLZMANN ABS3880 is a mobile dust collector with insert that delivers 3880 m³/h of suction performance at 1750 Pa through three 100 mm ports into two 200 l chip bags. Driven by a 2200 W S1 motor and a 300 mm fan wheel, the ABS3880 is offered as a 230 V or a 400 V variant.
-
To orderHOLZMANN ABS4000 Dust Collector – 3900 m³/h, Height Adjustable
Dust Collectors and Chip Extraction Units- Weight
- 47.98 kg
The ABS4000 is the collector for a low workshop: its body is height adjustable to a maximum of 1950 mm, some 250 mm under the fixed 2200 mm column of the ABS3000SE. A 2200 W motor at 2800 min-1 still delivers 3900 m³/h at 2100 Pa through ports of 1 x 150 mm and 3 x 100 mm, at 47.98 kg net on four casters.
-
To orderHOLZMANN ABS4500MF Multi-Filter Dust Collector (4500 m³/h)
Dust Collectors and Chip Extraction Units- Weight
- 143 kg
No three-phase board, but 4500 m³/h needed? That is the case the ABS4500MF answers: a 3000 W motor on 230 V / 50 Hz driving a 400 mm fan wheel to 2690 Pa through a single Ø200 mm inlet. An 18-element filter block of Ø160 x 945 mm gives 8.46 m² of surface, and chips drop into a 185 l bag. 143 kg net.
-
To orderHOLZMANN ABS4560 Dust Collector with Insert — 4560 m³/h, 400 V
Dust Collectors and Chip Extraction Units- Overall dimensions
- 2150 x 620 x 2320
- Weight
- 69.50 kg
-
To orderHOLZMANN ABS5000SE Twin-Bag Dust Collector – 5000 m³/h, 2200 W
Dust Collectors and Chip Extraction Units- Overall dimensions
- 1540 x 560 x 2470 mm
- Weight
- 60 kg
-
To orderHOLZMANN ABS7500MF Multi-Filter Dust Collector – 7500 m³/h
Dust Collectors and Chip Extraction Units- Overall dimensions
- 2110 x 1140 x 2260 mm
- Weight
- 243 kg
-
To orderHOLZMANN ABS8000PRO Dust Collector (8000 m³/h)
Dust Collectors and Chip Extraction Units- Overall dimensions
- 1900 x 670 x 2800 mm
- Weight
- 93 kg
-
To orderHOLZMANN ABS850 Dust Collector – 850 m³/h, 230V
Dust Collectors and Chip Extraction Units- Weight
- 23 kg
The HOLZMANN ABS850 is a compact single-machine dust collector delivering 850 m³/h at 800 Pa from a 750 W S1 (1050 W S6) motor on a 230V/50Hz supply, through a Ø100 mm port. The ABS850 uses a 230 mm fan wheel and a 40 litre chip bag, weighs 23 kg net and runs at 78 dB(A) sound power.
-
To orderHOLZMANN ABS850DBK Dust Collector for Wood Lathes – 850 m³/h
Dust Collectors and Chip Extraction Units- Overall dimensions
- 1100 x 500 x 1300 mm
- Weight
- 20.5 kg
-
To orderHOLZMANN FAN2200 Dust Fan – 4000 m³/h Extraction Blower
Dust Collectors and Chip Extraction Units- Overall dimensions
- 575 x 585 x 705 mm
- Weight
- 36 kg
-
To orderHOLZMANN FAN4000 Dust Extraction Fan (6500 m³/h)
Dust Collectors and Chip Extraction Units- Overall dimensions
- 620 x 665 x 795 mm
- Weight
- 55 kg
-
To orderHOLZMANN MABS750 Metal Dust Collector – 1100 m³/h, 750 W
Dust Collectors and Chip Extraction Units- Weight
- 36 kg
The HOLZMANN MABS750 is the three-phase member of HOLZMANN's 750 W collector class, and the one tuned for pressure: 1600 Pa of vacuum against 1100 m³/h, where the 230 V ABS1080 on the same motor rating holds 1020 Pa at 1080 m³/h. Two Ø100 mm ports, a 325 mm fan wheel, a 350 x 470 mm chip bag, 36 kg net.
Dust Collectors and Chip Extraction Units — in brief
A dust collector pulls chips and shavings away from the machine that makes them, through a hose or a ducted trunk line into a bag, and it is what keeps a woodworking shop breathable, safe and tidy. This category holds 17 HOLZMANN units, from the 23 kg ABS850 that serves one machine to the ABS8000PRO that feeds a whole ducted workshop, plus the FAN2200 and FAN4000 fan bodies for custom systems. Airflow runs from 850 to 8000 m³/h and static pressure from 800 to 3835 Pa, in 230 V single-phase and 400 V three-phase. All 17 are supplied by quotation.
How to choose a dust collector for a woodworking shop
Choose a dust collector from the port sizes and the duct run in front of it, not from the number of machines on paper. A single-machine collector such as the ABS850, ABS1080 or ABS1500FF is built for one Ø100 mm hood on a short hose. A ducted workshop needs a large trunk port and high static pressure – the ABS3000SE, ABS4560, ABS5000SE, ABS8000PRO or ABS7500MF class – because pressure, not the airflow figure on the label, is what survives a pipe run full of bends and blast gates.
Read airflow and static pressure together
Airflow and static pressure do two different jobs. Airflow in m³/h moves the volume of air; static pressure in Pa pushes that air down a long, restricted duct. On a short hose into a planer, airflow decides: the ABS850 gives 850 m³/h at 800 Pa, the ABS1500FF 1500 m³/h at 1020 Pa. On a fixed installation, pressure decides: the ABS7500MF reaches 3835 Pa on a 280 mm port, the ABS8000PRO 2800 Pa. Compare the ABS3880 at 3880 m³/h and 1750 Pa with the ABS4560 at 4560 m³/h and 2500 Pa to see how differently two similar machines behave on a trunk line.
Single-phase or three-phase supply?
Power supply removes several dust collectors from the shortlist before airflow does. The ABS850, ABS850DBK, ABS1080, ABS1500FF, ABS2200FLEX, ABS2480, ABS3880, ABS4000 and ABS4500MF run on 230 V single-phase, and several are also offered as a 400 V variant; the ABS3000SE comes in both. The ABS4500MF is the one unit above 4000 m³/h that stays on 230 V, at 4500 m³/h and 2690 Pa. The MABS750, ABS4560, ABS5000SE, ABS7500MF, ABS8000PRO, FAN2200 and FAN4000 are 400 V three-phase only.
Ceiling height, floor space and noise
Measure ceiling height before choosing a bag collector, because the bag column is the usual surprise: the ABS8000PRO stands 2800 mm, the ABS5000SE 2470 mm, the ABS2480 2430 mm and the ABS3000SE 2200 mm, each needing clearance above to change the bag. For a low shop the ABS4000 adjusts to a maximum of 1950 mm, and the ABS2200FLEX is 750 mm tall on a 1540 x 550 mm chassis that slides under a machine table. Noise follows size: the ABS850DBK stays under 70 dB(A) sound pressure and the ABS3000SE, ABS5000SE and ABS8000PRO under 85 dB(A), while large bag units sit near 87 to 90 dB(A).
What you budget separately
Budget the system around the dust collector, not only the collector. Ducting, hose, blast gates, clamps, reducers and the electrical work for a 400 V machine are separate items. Chip bags and filter elements are consumables: the ABS4500MF carries an 18-element block of 8.46 m², the ABS7500MF a 35-element block of 16.45 m². The FAN2200 (200/180 mm, 4000 m³/h) and FAN4000 (full-bore Ø250/Ø250, 6500 m³/h) are fan bodies rather than complete collectors, bought to drive a separator or filter housing specified around them.
What separates the cheap end from the expensive end
The distance from the ABS850 to the ABS8000PRO is duty, not just size. The ABS850 is a 750 W, 23 kg mobile unit with one Ø100 mm port and a 40 l bag, for one machine at a time. The ABS8000PRO is a 4500 W, 93 kg fixed installation whose Ø250 mm outlet divides into three Ø125 mm and one Ø100 mm connection, with the suction connection selectable top or bottom.
How to choose
-
One machine, short flexible hose
ABS850 (850 m³/h, 40 l bag) or ABS1080 (1080 m³/h, 100 l bag); the ABS1500FF adds airflow at 1500 m³/h in a 1400 mm tall body.
-
Two or three machines on a short trunk
ABS2480 with two Ø100 mm ports, ABS3880 with three, or ABS3000SE with a Ø150 mm plus three Ø100 mm outputs and a distributor.
-
Whole shop on a fixed ducted main
ABS5000SE (4 x Ø100 mm, 5000 m³/h), ABS8000PRO (Ø250 mm outlet, 8000 m³/h) or ABS7500MF (280 mm port, 7500 m³/h at 3835 Pa).
-
No three-phase board in the workshop
Stay on 230 V: the ABS4500MF is the only unit above 4000 m³/h on single-phase; ABS850 to ABS4000 also have 230 V versions.
-
Ceiling below 2 metres
ABS4000, height-adjustable to a maximum of 1950 mm, or the ABS2200FLEX at 750 mm tall, which parks under a machine table.
-
Long duct run with bends and blast gates
Prioritise static pressure over airflow: ABS7500MF 3835 Pa, ABS8000PRO 2800 Pa, ABS4500MF 2690 Pa, ABS5000SE 2600 Pa, ABS4560 2500 Pa.
-
Lathe or bench needing a flat hood
ABS850DBK, with a height-adjustable 230 x 125 mm hood that sits behind a turning workpiece, and under 70 dB(A) sound pressure.
-
Existing cyclone, silo or custom filter housing
Buy the fan only: FAN2200 (200/180 mm, 4000 m³/h at 1900 Pa) or FAN4000 (Ø250/Ø250 full bore, 6500 m³/h at 2000 Pa).
