Which workshop equipment should a small joinery buy first?

Extraction comes first in almost every small joinery. A dust extractor sized to the machines already installed protects the operator, keeps the floor and machine tables workable, and stops chips jamming fences and guards; power feeders, downdraft sanding tables and a profile knife grinder are added afterwards as production grows. Within extraction, size the collector from the machine port diameters and the distance to the collector rather than from the airflow figure on its own.

Does workshop equipment need three-phase power?

Not all workshop equipment needs three-phase power. Small dust collectors, the 1050 mm and 2200 mm downdraft sanding tables and one 4500 m³/h collector run on a 230 V single-phase supply, and several mid-size collectors are catalogued in both 230 V and 400 V versions. The largest collectors and dust fans, two of the three cyclone separators and the profile knife grinder require 400 V (380 V) three-phase. Confirm what the workshop board actually provides before choosing capacity, because supply voltage narrows the model list faster than any other criterion.

How much floor space and ducting does a dust extraction system need?

A dust extraction system needs more space than its own footprint. Allow room to swing a chip bag off or roll a 110-227 litre cyclone bin out, and check ceiling height, because the tall collectors and the largest cyclone reach around 2190-2200 mm, while one under-machine collector is only 750 mm high and one collector body adjusts down to 1950 mm. Ducting itself is designed to the workshop layout — trunk diameter, branch diameters, blast gates, hoods and flexible hose — and is specified with the machine rather than assumed.

Cyclone separator or bag dust collector for a woodworking shop?

A cyclone separator is the better choice where fine dust and filter cleaning are the problem: chips drop into a wheeled bin of 110, 151 or 227 litres before reaching the filter, so suction stays consistent and emptying is a bin roll rather than a bag change. A bag dust collector is the better choice for a single machine, a tight budget or a low ceiling, since the cyclones stand 1840 to 2190 mm tall and two of the three need 400 V three-phase power.

Is a power feeder worth it in a small workshop?

A power feeder is worth having in a small workshop precisely because a small workshop has fewer hands. A feeder holds stock against the fence at a constant speed, keeps the operator's hands away from a spindle moulder or rip saw cutter, and removes the stop marks and burns that hand feeding leaves on a finished edge. Single-wheel feeders let curved and shaped parts follow a template; three- and four-roller heads with eight speeds from 3.5 to 34 m/min suit straight ripping and moulding, with the four-roller version keeping long boards under drive through the whole pass.

What decides the cost of workshop equipment?

The cost of workshop equipment is driven by capacity and configuration rather than by brand alone: airflow and static pressure on a collector, the number and diameter of ports, filter area and bag or bin capacity, the voltage version ordered, table length on a downdraft sanding table, and the number of driven wheels on a feeder. Around the machine sit the ducting network, hoods, blast gates, spare bags and filter elements, grinding wheels, delivery and installation. Send the machine list, the workshop layout and the supply voltage with the enquiry and the quotation prices the whole system in one offer.

Workshop Equipment

30 machines

Sort Recommended

Cyclone Dust Collectors Downdraft Sanding Tables Dust Collectors and Chip Extraction Units Power Feeders Profile Knife Grinding Machines

Machines found

To order

HOLZMANN SSAT150H Downdraft Sanding Table – 1440 x 800 mm
Downdraft Sanding Tables

Table Size

1440 x 800 mm

Table Height

760 - 1030 mm

Overall dimensions

1570 x 1050 x 760
To order

HOLZMANN SSAT150M Metal Sanding Table
Downdraft Sanding Tables

Table Size

1350 x 695 mm

Table Height

760 - 1030 mm

Overall dimensions

1570 x 1050 x 760
To order

HOLZMANN SSAT2200 Downdraft Sanding Table (2200 mm)
Downdraft Sanding Tables

Overall dimensions

2200 x 600 x 850 mm

Weight

130 kg
To order

NETMAK NPM 200 Profile Knife Grinding Machine
Profile Knife Grinding Machines

Spindle

2400-2800 rpm

Profile length is the deciding capacity on the NETMAK NPM 200: moulding knives up to 200 mm long and cutter heads up to 300 mm in diameter can be reground in-house. The NPM 200 turns a 250 mm wheel with a 40 mm bore at 2400-2800 rpm from a 2.2 kW, 380 V / 50 Hz motor, with side angles adjustable to ±20 degrees.
To order

NETMAK ST-1 Single-Wheel Automatic Power Feeder
Power Feeders

Weight

60 kg

Overall dimensions

460 x 1100 x 700 mm
To order

NETMAK ST-4 Four-Wheel Automatic Power Feeder
Power Feeders

Weight

80 kg

Overall dimensions

600 x 1100 x 700 mm

Workshop Equipment — in brief

Workshop equipment covers the machines that serve every other machine in a joinery: dust and chip extraction, cyclone separation, downdraft sanding tables, power feeders that push stock through a saw or moulder, and a grinder for re-sharpening profile knives. None of this equipment cuts a part, yet the accuracy, dust load, safety and running cost of the whole shop depend on it. This category holds 30 machines from HOLZMANN (Austria) and NETMAK (Turkey) across five groups. Every machine is supplied by quotation, with voltage, port configuration and ducting agreed before the offer is issued.

Workshop Equipment

Machines found

HOLZMANN SSAT150H Downdraft Sanding Table – 1440 x 800 mm

HOLZMANN SSAT150M Metal Sanding Table

HOLZMANN SSAT2200 Downdraft Sanding Table (2200 mm)

NETMAK NPM 200 Profile Knife Grinding Machine

NETMAK ST-1 Single-Wheel Automatic Power Feeder

NETMAK ST-4 Four-Wheel Automatic Power Feeder

Workshop Equipment — in brief

Filter

Saved machines

Your saved list is empty