How do I choose between the HOLZMANN and MIZRAK edge banding machines?

Choose an edge banding machine by class first, then by unit list. Hand-guided HOLZMANN machines (KAM45PRO, KAM50M, KAM55V, KAM65PRO) work on 230 V for repairs, curved fronts and site work; the KAM535NEO adds a powered 0-15 m/min feed and a table; the automatic machines from the KAM35P and ADVANTAGE-3 upward add pre-milling, end cutting, scraping, corner rounding and grooving in a fixed sequence. Set the panel thickness you band (8-42, 8-54 or 8-60 mm) and the units you need, and the shortlist reduces to a few models.

What power supply do edge banding machines need?

Edge banding machines split by power supply: the portable HOLZMANN units - KAM45PRO at 855 W, KAM55V at 765 W, KAM50M at 2000 W and the KAM65PRO - run on single-phase 230 V, while every automatic bander here is a 400 V three-phase machine. Connected load rises from 3.62 kW on the MIZRAK ADVANTAGE-3 and 3960 W on the HOLZMANN KAM35EP to 12.68 kW on the OF-KA TUANA 56 and 19.38 kW on the OF-KA TUANA 56 PREMIUM, so confirm the load of your chosen model against the workshop supply before ordering.

How much floor space and extraction does an edge bander need?

An edge bander needs its frame length plus infeed and outfeed space for the longest panel handled, with room to walk both sides. Frames run from 2500 mm on the ADVANTAGE-3 and 2060 mm on the KAM35P up to 4900 mm on the ADVANTAGE-6 and 5900-7180 mm on the TUANA 56 machines. Extraction is required because pre-milling and trimming produce fine chip at each unit; the HOLZMANN KAM4EPS has integrated dust collection and the MIZRAK ADVANTAGE-4 integrates extraction, while the longer machines are connected to the shop extraction system.

Do I really need a pre-milling unit on an edge bander?

A pre-milling unit is worth specifying on an edge banding machine when panels arrive with saw marks, slight chipping or a not-quite-square edge, because pre-milling recuts the edge immediately before glue is applied and improves the glue line. Pre-milling is exactly what separates the MIZRAK MZK-4 (4.02 kW, no pre-milling) from the OF MZK-4 (1.5 kW cutter at 12,000 rpm, 7.02 kW) and the HOLZMANN KAM35EP from the KAM35ESV. If panels are cut on a well set scoring panel saw and banded immediately, a machine without pre-milling can still give a clean result.

What determines the price of an edge banding machine?

The price of an edge banding machine is driven by the unit list (pre-milling, end cutting, trimming, scraping, corner rounding, grooving), panel and tape capacity, feed speed, control level and frame length - a manually set ADVANTAGE-3 and a PC-controlled ROYAL 8 EXTRA are different machines, not different discounts. Add the tooling and consumables package: EVA glue granulate, edge tape, spare trimming cutters and scraper blades, compressed air, extraction, plus delivery, installation and operator training. Every model on this page is quoted individually, so send your panel sizes and volumes with the request.

Can these machines band curved fronts and radiused panels?

Yes, but the class of edge bander decides how. The handheld HOLZMANN KAM50M bands both straight and curved workpieces, and the stationary KAM535NEO follows an inside radius down to 20 mm while its own 250 W feed pulls the panel past the glue pot. Automatic one-sided machines band straight edges only; for radiused fronts what matters there is a corner rounding unit, fitted to 36 mm on the MIZRAK ADVANTAGE-6 and to 42 mm on the OF-KA TUANA 56 PREMIUM, which removes hand dressing of the corners after banding.

Edge Banding Machines

28 machines

Sort Name

Beam Saws Boring and Mortising Machines CNC RoutersEdge Banding MachinesSliding Table Panel Saws

Machines found

To order

MIZRAK OF-KA TUANA 56 Edge Banding Machine
Edge Banding Machines

Workpiece Thickness

8 – 54 mm

Working Speed

14 m/min

Air pressure

6 – 8 atm
To order

MIZRAK OF-KA TUANA 56 PREMIUM Edge Banding Machine
Edge Banding Machines

Workpiece Thickness

8 – 60 mm

Working Speed

14 – 18 m/min

Air pressure

6 – 8 atm
To order

MIZRAK ROYAL 8 EXTRA Edge Banding Machine
Edge Banding Machines

PC control with a servo-driven pre-tracer is the highest control level Mizrak fits to an edge bander, and the ROYAL 8 EXTRA is the machine carrying that package: infrared pre-heating, a sensor-fed motorised glue pot and disc-tracer milling for 0-3 mm tape. Mizrak publishes no capacity table for the ROYAL 8 EXTRA.
To order

MIZRAK TUANA 56 X PLUS Edge Banding Machine
Edge Banding Machines

PC control with a servo-driven pre-tracer is what sets the TUANA 56 X PLUS apart from the PLC-screen OF TUANA 56. Published units cover jumping pre-milling, infrared pre-heating, a sensor-fed glue pot, pneumatic top pressure, angled end cutting and 0-3 mm disc-tracer milling; Mizrak publishes no technical table for the TUANA 56 X PLUS.

Edge Banding Machines — in brief

An edge banding machine glues tape to the cut edge of a panel and then trims, scrapes and polishes it in one pass. This category covers 28 machines from HOLZMANN and MIZRAK across three classes: hand-guided 230 V banders such as the KAM50M and KAM65PRO, the stationary powered-feed KAM535NEO, and automatic one-sided lines from the 3.62 kW MIZRAK ADVANTAGE-3 and HOLZMANN KAM35P up to the PC-controlled ROYAL 8 EXTRA and TUANA 56 X PLUS. Panel capacity runs from 8-42 mm to 8-60 mm and feed speed from 2 to 18 m/min. Every machine is sold by quotation.

Edge Banding Machines

Machines found

MIZRAK OF-KA TUANA 56 Edge Banding Machine

MIZRAK OF-KA TUANA 56 PREMIUM Edge Banding Machine

MIZRAK ROYAL 8 EXTRA Edge Banding Machine

MIZRAK TUANA 56 X PLUS Edge Banding Machine

Edge Banding Machines — in brief

Filter

Saved machines

Your saved list is empty