Which woodworking machine should a workshop buy first?

A workshop working solid timber should buy surfacing first, meaning a jointer or a combined planer-thicknesser, because unflattened timber makes every later operation inaccurate. Sawing comes next - a bandsaw for curves and resawing or a circular saw for straight cuts - then a spindle moulder for profiles and joinery, then a sander for finishing. A log bandsaw is only needed by workshops converting their own logs.

What is the difference between a jointer, a thicknesser and a combination machine?

A jointer creates the first flat face and a square edge on a board, a thicknesser then planes the board to a constant thickness parallel to that face, and a combined planer-thicknesser performs both functions on one frame. A combination machine saves floor space and cost and suits small workshops; separate machines suit shops where two operators work at once or where changeover time is costly. This category lists 16 combination machines alongside separate jointers and thicknessers.

Do woodworking machines need single-phase or three-phase power?

Woodworking machines in this category split by size: small bandsaws, bench sanders, lathes and light planers are available for single-phase 230 V, while spindle moulders, larger thicknessers, four-sided moulders, log bandsaws and wide belt calibrating sanders require three-phase 400 V. Confirm your workshop supply before ordering, because upgrading a workshop to three-phase afterwards costs far more than specifying the correct machine at the start.

How much space and dust extraction does woodworking machinery need?

Woodworking machinery needs clear space equal to your longest workpiece at both ends of the machine, so a thicknesser or planer handling 3 m boards needs roughly three times that length overall, regardless of how compact the machine looks. Chip extraction is required on every machine here, and spindle moulders, thicknessers, four-sided moulders and wide belt sanders generate chip volumes a small workshop vacuum cannot cope with - size the extractor to the largest port and to how many machines run at once.

What tooling do I have to budget on top of the machine?

Tooling for woodworking machinery is budgeted separately from the machine in every case: saw blades for circular and crosscut saws, blades for bandsaws, knives or a spiral cutterblock for planers and thicknessers, cutter heads with limiters and collars for spindle moulders, sanding belts and discs for sanders, and chisels and chucks for lathes. Tell us the profiles and materials you work and the tooling package will be quoted as its own line.

What makes one woodworking machine more expensive than another?

Woodworking machine prices are driven by working capacity and build quality rather than by brand name: planing width and table length, bandsaw throat and wheel size, spindle diameter and motor power, sanding belt width, and lathe centre distance. Cast iron tables, powered feed, digital readouts and braked motors all move a machine up the range. Delivery to site, installation and the tooling package are quoted as separate lines from the machine price.

Woodworking Machinery

129 machines

Sort Width: high to low

Machines found

To order

HOLZMANN TS305 Disc Sanding Machine
Belt, Disc and Drum Sanders

Table Size

400 x 130 mm

Weight

27 kg
To order

HOLZMANN TS400Z Table Saw – Rotating Table, 120 mm Cutting Height
Circular Saws and Table Saws

Table Size

715 x 945 mm

Table Height

845 mm

Overall dimensions

1350 x 1100 x 1180 mm
To order

HOLZMANN TS400ZAL Extension Arm Set for Carpenter Table Saw
Circular Saws and Table Saws

Overall dimensions

3600 x 1400 x 1180 mm

Weight

60 kg
To order

HOLZMANN TSM250 Disc Sander
Belt, Disc and Drum Sanders

Table Size

290 x 140 mm

Weight

11 kg
To order

HOLZMANN VD1100N Wood Lathe (1100 mm, Cast Iron, Copying Option)
Wood Lathes

Table Height

900 mm

Spindle

12 mm

Weight

119 kg
To order

HOLZMANN VS20PRO Four Side Planer / Moulder
Four-Side Planers and Moulders

Weight

1000 kg

The HOLZMANN VS20PRO is a 17.1 kW four side planer and moulder running on 400 V three-phase power, with four massive 120 mm diameter planer heads and a 1000 kg cast structure. The VS20PRO dresses all four faces of a workpiece in a single pass, replacing separate surfacing, thicknessing and moulding operations.
To order

HOLZMANN VST3000 Panel Glueing Press (4 x 2.5 t)
Panel Glue Presses

Overall dimensions

2040/3000 mm

Weight

220 kg
To order

HOLZMANN VSTR3000 Panel Glueing Press (6 x 2 t, Hydraulic)
Panel Glue Presses

Overall dimensions

2040/3000 mm

Weight

325 kg
To order

HOLZMANN ZS400U Mini Wide Belt Sander (400 mm)
Belt, Disc and Drum Sanders

Feed speed

0-3 m/min

Workpiece Thickness

130 mm

Weight

96 kg
To order

HOLZMANN ZS560FU Mini Wide Belt Sander (560 mm, frequency controlled)
Belt, Disc and Drum Sanders

Table Size

592 x 505 mm

Workpiece Thickness

80 mm

Weight

118 kg
To order

HOLZMANN ZS560U Mini Wide Belt Sander (560 mm)
Belt, Disc and Drum Sanders

Feed speed

0-3 m/min

Workpiece Thickness

80 mm

Weight

118 kg
To order

HOLZMANN ZS635NEO Mini Wide Belt Sander (630 mm, two drums)
Belt, Disc and Drum Sanders

Overall dimensions

1145 x 715 x 1325 mm

Workpiece Thickness

125 mm

Weight

206 kg
To order

HOLZMANN ZS640P Drum Sander – 640 mm Sanding Width
Belt, Disc and Drum Sanders

Feed speed

1.8-7.3 m/min

Overall dimensions

1143 x 711 x 1321 mm

Workpiece Thickness

127 mm
To order

HOLZMANN ZS970P Twin-Drum Sander – 970 mm Sanding Width
Belt, Disc and Drum Sanders

Feed speed

1.9-9.1 m/min

Overall dimensions

1473 x 1219 x 889 mm

Workpiece Thickness

304 mm
To order

Mizrak Kalinlik Makinasi (Thicknesser)
Thicknessers (Thickness Planers)

The Mizrak Kalinlik Makinasi is a thicknesser: timber with one flat reference face passes through and leaves with the opposite face machined parallel at a set thickness. Unlike the numbered KA-series thicknessers, the Mizrak Kalinlik Makinasi carries no published width, motor or feed figure, so capacity is confirmed at quotation.
To order

NETMAK FR 2000 I.T. Extension Table Spindle Moulder
Spindle Moulders (Shapers)

Table Size

2000 x 800 mm

Table Height

850 mm

Spindle

30 mm
To order

NETMAK FR 2000 S Sliding Table Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1000 x 750 mm

Table Height

850 mm

Spindle

30 mm
To order

NETMAK FR 2000 SA Reinforced Carriage Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1000 x 750 mm

Table Height

850 mm

Spindle

30 mm
To order

Netmak FR 2000 Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1000 x 750 mm

Table Height

850 mm

Spindle

30 mm
To order

NETMAK FR 2000Y Tilting Spindle Moulder
Tilting Spindle Moulders

Table Size

1050 x 800 mm

Table Height

900 mm

Spindle

140 mm - 150 mm
To order

NETMAK FR 2100 I.T. Extension Table Spindle Moulder
Spindle Moulders (Shapers)

Table Size

2200 x 840 mm

Table Height

850 mm

Spindle

30-35 mm
To order

NETMAK FR 2100 S Sliding Table Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1200 x 800 mm

Table Height

850 mm

Spindle

30-35 mm
To order

NETMAK FR 2100 SA Reinforced Carriage Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1200 x 800 mm

Table Height

850 mm

Spindle

30-35 mm
To order

NETMAK FR 2100 Spindle Moulder
Spindle Moulders (Shapers)

Table Size

1200 x 800 mm

Table Height

850 mm

Spindle

30-35 mm

Woodworking Machinery — in brief

Woodworking machinery covers the machines that convert solid timber: sawing it, flattening and thicknessing it, moulding and shaping it, sanding it and turning it. This category holds 129 machines from HOLZMANN (Austria), MIZRAK and NETMAK (Turkey) across 20 machine types, the largest groups being sanders (25), spindle moulders (18), planer-thicknesser combinations (16), bandsaws (11) and thicknessers (10). Alongside these sit log bandsaws, circular saws, lathes and copy lathes, crosscut saws, panel glue presses, four-sided moulders, a wide belt calibrating sander and CNC laser cutter-engravers. All machines are supplied by quotation.

Woodworking Machinery

Machines found

HOLZMANN TS305 Disc Sanding Machine

HOLZMANN TS400Z Table Saw – Rotating Table, 120 mm Cutting Height

HOLZMANN TS400ZAL Extension Arm Set for Carpenter Table Saw

HOLZMANN TSM250 Disc Sander

HOLZMANN VD1100N Wood Lathe (1100 mm, Cast Iron, Copying Option)

HOLZMANN VS20PRO Four Side Planer / Moulder

HOLZMANN VST3000 Panel Glueing Press (4 x 2.5 t)

HOLZMANN VSTR3000 Panel Glueing Press (6 x 2 t, Hydraulic)

HOLZMANN ZS400U Mini Wide Belt Sander (400 mm)

HOLZMANN ZS560FU Mini Wide Belt Sander (560 mm, frequency controlled)

HOLZMANN ZS560U Mini Wide Belt Sander (560 mm)

HOLZMANN ZS635NEO Mini Wide Belt Sander (630 mm, two drums)

HOLZMANN ZS640P Drum Sander – 640 mm Sanding Width

HOLZMANN ZS970P Twin-Drum Sander – 970 mm Sanding Width

Mizrak Kalinlik Makinasi (Thicknesser)

NETMAK FR 2000 I.T. Extension Table Spindle Moulder

NETMAK FR 2000 S Sliding Table Spindle Moulder

NETMAK FR 2000 SA Reinforced Carriage Spindle Moulder

Netmak FR 2000 Spindle Moulder

NETMAK FR 2000Y Tilting Spindle Moulder

NETMAK FR 2100 I.T. Extension Table Spindle Moulder

NETMAK FR 2100 S Sliding Table Spindle Moulder

NETMAK FR 2100 SA Reinforced Carriage Spindle Moulder

NETMAK FR 2100 Spindle Moulder

Woodworking Machinery — in brief

Filter

Saved machines

Your saved list is empty