Which woodworking machine should a workshop buy first?

A workshop working solid timber should buy surfacing first, meaning a jointer or a combined planer-thicknesser, because unflattened timber makes every later operation inaccurate. Sawing comes next - a bandsaw for curves and resawing or a circular saw for straight cuts - then a spindle moulder for profiles and joinery, then a sander for finishing. A log bandsaw is only needed by workshops converting their own logs.

What is the difference between a jointer, a thicknesser and a combination machine?

A jointer creates the first flat face and a square edge on a board, a thicknesser then planes the board to a constant thickness parallel to that face, and a combined planer-thicknesser performs both functions on one frame. A combination machine saves floor space and cost and suits small workshops; separate machines suit shops where two operators work at once or where changeover time is costly. This category lists 16 combination machines alongside separate jointers and thicknessers.

Do woodworking machines need single-phase or three-phase power?

Woodworking machines in this category split by size: small bandsaws, bench sanders, lathes and light planers are available for single-phase 230 V, while spindle moulders, larger thicknessers, four-sided moulders, log bandsaws and wide belt calibrating sanders require three-phase 400 V. Confirm your workshop supply before ordering, because upgrading a workshop to three-phase afterwards costs far more than specifying the correct machine at the start.

How much space and dust extraction does woodworking machinery need?

Woodworking machinery needs clear space equal to your longest workpiece at both ends of the machine, so a thicknesser or planer handling 3 m boards needs roughly three times that length overall, regardless of how compact the machine looks. Chip extraction is required on every machine here, and spindle moulders, thicknessers, four-sided moulders and wide belt sanders generate chip volumes a small workshop vacuum cannot cope with - size the extractor to the largest port and to how many machines run at once.

What tooling do I have to budget on top of the machine?

Tooling for woodworking machinery is budgeted separately from the machine in every case: saw blades for circular and crosscut saws, blades for bandsaws, knives or a spiral cutterblock for planers and thicknessers, cutter heads with limiters and collars for spindle moulders, sanding belts and discs for sanders, and chisels and chucks for lathes. Tell us the profiles and materials you work and the tooling package will be quoted as its own line.

What makes one woodworking machine more expensive than another?

Woodworking machine prices are driven by working capacity and build quality rather than by brand name: planing width and table length, bandsaw throat and wheel size, spindle diameter and motor power, sanding belt width, and lathe centre distance. Cast iron tables, powered feed, digital readouts and braked motors all move a machine up the range. Delivery to site, installation and the tooling package are quoted as separate lines from the machine price.

Woodworking Machinery

129 machines

Sort Width: high to low

Machines found

To order

NETMAK FRS 1250 Vertical Spindle Router (Sakuli Freze)
Overhead Routers (Vertical Spindle Routers)

Table Size

960 x 1220 mm

Spindle

80 mm

Collet

12-14 mm
To order

NETMAK FRS 900 Vertical Spindle Router (Sakuli Freze)
Overhead Routers (Vertical Spindle Routers)

Table Size

790 x 970 mm

Spindle

80 mm

Collet

12-14 mm
To order

NETMAK KA 400 Thicknesser
Thicknessers (Thickness Planers)

Table Size

420 x 790 mm

Feed speed

7-14 m/min

Overall dimensions

800 x 1000 x 1050 mm
To order

NETMAK KA 500 Thicknesser
Thicknessers (Thickness Planers)

Table Size

520 x 890 mm

Feed speed

7-14 m/min

Overall dimensions

900 x 1100 x 1050 mm
To order

NETMAK KA 600 Thicknesser (600 mm)
Thicknessers (Thickness Planers)

Table Size

620 x 990 mm

Spindle

4500 rpm

Feed speed

7-14 m/min
To order

NETMAK KA 630 Thicknesser (630 mm)
Thicknessers (Thickness Planers)

Table Size

640 x 990 mm

Spindle

4500 rpm

Feed speed

7-14 m/min
To order

NETMAK PL 400 Surface Planer (400 mm)
Surface Planers (Jointers)

Table Size

400 x 2600 mm

Spindle

4500 rpm

Overall dimensions

800 x 2600 x 1250 mm
To order

NETMAK PL 500 Surface Planer (500 mm)
Surface Planers (Jointers)

Table Size

500 x 2600 mm

Spindle

4500 rpm

Overall dimensions

900 x 2650 x 1250 mm
To order

NETMAK PL 600 Surface Planer (600 mm)
Surface Planers (Jointers)

Table Size

600 x 2600 mm

Spindle

4500 rpm

Overall dimensions

1000 x 2650 x 1250 mm

Woodworking Machinery — in brief

Woodworking machinery covers the machines that convert solid timber: sawing it, flattening and thicknessing it, moulding and shaping it, sanding it and turning it. This category holds 129 machines from HOLZMANN (Austria), MIZRAK and NETMAK (Turkey) across 20 machine types, the largest groups being sanders (25), spindle moulders (18), planer-thicknesser combinations (16), bandsaws (11) and thicknessers (10). Alongside these sit log bandsaws, circular saws, lathes and copy lathes, crosscut saws, panel glue presses, four-sided moulders, a wide belt calibrating sander and CNC laser cutter-engravers. All machines are supplied by quotation.

Woodworking Machinery

Machines found

NETMAK FRS 1250 Vertical Spindle Router (Sakuli Freze)

NETMAK FRS 900 Vertical Spindle Router (Sakuli Freze)

NETMAK KA 400 Thicknesser

NETMAK KA 500 Thicknesser

NETMAK KA 600 Thicknesser (600 mm)

NETMAK KA 630 Thicknesser (630 mm)

NETMAK PL 400 Surface Planer (400 mm)

NETMAK PL 500 Surface Planer (500 mm)

NETMAK PL 600 Surface Planer (600 mm)

Woodworking Machinery — in brief

Filter

Saved machines

Your saved list is empty